TCP-MIB DEFINITIONS::=BEGINIMPORTSMODULE-IDENTITY,OBJECT-TYPE,Integer32,Gauge32,Counter32,IpAddress, mib-2 FROM SNMPv2-SMI
MODULE-COMPLIANCE,OBJECT-GROUPFROM SNMPv2-CONF;tcpMIB MODULE-IDENTITYLAST-UPDATED"9411010000Z"
ORGANIZATION"IETF SNMPv2 Working Group"CONTACT-INFO" Keith McCloghrie
Postal: Cisco Systems, Inc.
170 West Tasman Drive
San Jose, CA 95134-1706
US
Phone: +1 408 526 5260
Email: kzm@cisco.com"DESCRIPTION"The MIB module for managing TCP implementations."REVISION"9103310000Z"DESCRIPTION"The initial revision of this MIB module was part of MIB-
II."::={ mib-2 49}-- the TCP grouptcp OBJECTIDENTIFIER::={ mib-2 6}tcpRtoAlgorithm OBJECT-TYPESYNTAXINTEGER{other(1),-- none of the followingconstant(2),-- a constant rto
rsre(3),-- MIL-STD-1778, Appendix Bvanj(4)-- Van Jacobson's algorithm [5]}MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The algorithm used to determine the timeout value used for
retransmitting unacknowledged octets."::={ tcp 1}tcpRtoMin OBJECT-TYPESYNTAXInteger32UNITS"milliseconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The minimum value permitted by a TCP implementation for the
retransmission timeout, measured in milliseconds. More
refined semantics for objects of this type depend upon the
algorithm used to determine the retransmission timeout. In
particular, when the timeout algorithm is rsre(3), an object
of this type has the semantics of the LBOUND quantity
described in RFC 793."::={ tcp 2}tcpRtoMax OBJECT-TYPESYNTAXInteger32UNITS"milliseconds"MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The maximum value permitted by a TCP implementation for the
retransmission timeout, measured in milliseconds. More
refined semantics for objects of this type depend upon the
algorithm used to determine the retransmission timeout. In
particular, when the timeout algorithm is rsre(3), an object
of this type has the semantics of the UBOUND quantity
described in RFC 793."::={ tcp 3}tcpMaxConn OBJECT-TYPESYNTAXInteger32
MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The limit on the total number of TCP connections the entity
can support. In entities where the maximum number of
connections is dynamic, this object should contain the value
-1."::={ tcp 4}tcpActiveOpens OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of times TCP connections have made a direct
transition to the SYN-SENT state from the CLOSED state."::={ tcp 5}tcpPassiveOpens OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of times TCP connections have made a direct
transition to the SYN-RCVD state from the LISTEN state."::={ tcp 6}tcpAttemptFails OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of times TCP connections have made a direct
transition to the CLOSED state from either the SYN-SENT
state or the SYN-RCVD state, plus the number of times TCP
connections have made a direct transition to the LISTEN
state from the SYN-RCVD state."::={ tcp 7}tcpEstabResets OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of times TCP connections have made a direct
transition to the CLOSED state from either the ESTABLISHED
state or the CLOSE-WAIT state."
::={ tcp 8}tcpCurrEstab OBJECT-TYPESYNTAXGauge32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of TCP connections for which the current state
is either ESTABLISHED or CLOSE- WAIT."::={ tcp 9}tcpInSegs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of segments received, including those
received in error. This count includes segments received on
currently established connections."::={ tcp 10}tcpOutSegs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-only
STATUScurrentDESCRIPTION"The total number of segments sent, including those on
current connections but excluding those containing only
retransmitted octets."::={ tcp 11}tcpRetransSegs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The total number of segments retransmitted - that is, the
number of TCP segments transmitted containing one or more
previously transmitted octets."::={ tcp 12}-- the TCP Connection table-- The TCP connection table contains information about this
-- entity's existing TCP connections.tcpConnTable OBJECT-TYPESYNTAXSEQUENCEOF TcpConnEntry
MAX-ACCESSnot-accessible
STATUScurrentDESCRIPTION"A table containing TCP connection-specific information."::={ tcp 13}tcpConnEntry OBJECT-TYPESYNTAX TcpConnEntry
MAX-ACCESSnot-accessibleSTATUScurrentDESCRIPTION"A conceptual row of the tcpConnTable containing information
about a particular current TCP connection. Each row of this
table is transient, in that it ceases to exist when (or soon
after) the connection makes the transition to the CLOSED
state."INDEX{ tcpConnLocalAddress,
tcpConnLocalPort,
tcpConnRemAddress,
tcpConnRemPort }::={ tcpConnTable 1}
TcpConnEntry ::=SEQUENCE{
tcpConnState INTEGER,
tcpConnLocalAddress IpAddress,
tcpConnLocalPort INTEGER,
tcpConnRemAddress IpAddress,
tcpConnRemPort INTEGER}tcpConnState OBJECT-TYPESYNTAXINTEGER{closed(1),listen(2),synSent(3),synReceived(4),established(5),finWait1(6),finWait2(7),closeWait(8),
lastAck(9),closing(10),timeWait(11),deleteTCB(12)}MAX-ACCESSread-writeSTATUScurrentDESCRIPTION"The state of this TCP connection.
The only value which may be set by a management station is
deleteTCB(12). Accordingly, it is appropriate for an agent
to return a `badValue' response if a management station
attempts to set this object to any other value.
If a management station sets this object to the value
deleteTCB(12), then this has the effect of deleting the TCB
(as defined in RFC 793) of the corresponding connection on
the managed node, resulting in immediate termination of the
connection.
As an implementation-specific option, a RST segment may be
sent from the managed node to the other TCP endpoint (note
however that RST segments are not sent reliably)."
::={ tcpConnEntry 1}tcpConnLocalAddress OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The local IP address for this TCP connection. In the case
of a connection in the listen state which is willing to
accept connections for any IP interface associated with the
node, the value 0.0.0.0 is used."::={ tcpConnEntry 2}tcpConnLocalPort OBJECT-TYPESYNTAXINTEGER(0..65535)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The local port number for this TCP connection."::={ tcpConnEntry 3}
tcpConnRemAddress OBJECT-TYPESYNTAXIpAddressMAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The remote IP address for this TCP connection."::={ tcpConnEntry 4}tcpConnRemPort OBJECT-TYPESYNTAXINTEGER(0..65535)MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The remote port number for this TCP connection."::={ tcpConnEntry 5}tcpInErrs OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrent
DESCRIPTION"The total number of segments received in error (e.g., bad
TCP checksums)."::={ tcp 14}tcpOutRsts OBJECT-TYPESYNTAXCounter32MAX-ACCESSread-onlySTATUScurrentDESCRIPTION"The number of TCP segments sent containing the RST flag."::={ tcp 15}-- conformance informationtcpMIBConformance OBJECTIDENTIFIER::={ tcpMIB 2}tcpMIBCompliances OBJECTIDENTIFIER::={ tcpMIBConformance 1}tcpMIBGroups OBJECTIDENTIFIER::={ tcpMIBConformance 2}
-- compliance statementstcpMIBCompliance MODULE-COMPLIANCESTATUScurrentDESCRIPTION"The compliance statement for SNMPv2 entities which
implement TCP."MODULE-- this moduleMANDATORY-GROUPS{ tcpGroup
}::={ tcpMIBCompliances 1}-- units of conformancetcpGroup OBJECT-GROUPOBJECTS{ tcpRtoAlgorithm, tcpRtoMin, tcpRtoMax,
tcpMaxConn, tcpActiveOpens,
tcpPassiveOpens, tcpAttemptFails,
tcpEstabResets, tcpCurrEstab, tcpInSegs,
tcpOutSegs, tcpRetransSegs, tcpConnState,
tcpConnLocalAddress, tcpConnLocalPort,
tcpConnRemAddress, tcpConnRemPort,
tcpInErrs, tcpOutRsts }STATUScurrentDESCRIPTION"The tcp group of objects providing for management of TCP
entities."::={ tcpMIBGroups 1}END